Two examples of representations of Thor’s hammer. They are both about 50mm high and solid sterling silver – they weigh about 50g each. The design was driven by the client who wanted an ‘authentic’ look rather than refined, so you can see defects from the casting. The brief was also this style and not the shaft and head style hammer. The left hand one has a satin finish, as the client requested, whereas the right hand is shiny. The shiny one is available from my shop. I could remove more of the casting defects and satinise that if required. UK hallmarks are on the rear. I made clay models as the patterns for the castings, so I could repeat the left hand one too. These are about the limit of my modelling skills.